Sachtler FSB2 (75mm bowl)

• carbon fibre legs
• mid level spreader
• min height - 95cm
• max height - 158cm
• Payload 1 - 6kg / 2 - 13lbs
• Weight (without bag) - 5.1kg

TR01

Sachtler DV6SB (75mm bowl)

• carbon fibre legs
• Speed Balance
• mid-level spreader
• min height - 95cm
• max height - 158cm
• Payload 1 - 6kg / 2 - 13lbs
• Weight (without bag) - 5.3kg

TR02

Sachtler Video18 (100mm bowl)

• 6x available
• carbon fibre legs
• mid level spreader
• min height - 63cm
• max height - 172cm
• Payload 2 - 18kg / 4 - 40lbs
• Weight (without bag) - 7.9kg

TR03

Sachtler Video20 (100mm bowl)

• 2x available
• carbon fibre legs
• mid level spreader
• min height - 73cm
• max height - 174cm
• Payload 2 - 25kg / 4 - 55lbs
• Weight (without bag) - 9.9kg

TR04

Sachtler Video25 (150mm bowl)

  now available with Ronford tripod legs

• Aluminium legs
• bottom spreader
• min height - 73cm
• max height - 174cm
• Payload 2 - 35kg / 4 - 55lbs
• Weight (without bag) - 12.7kg

TR05

Sachtler Video25 tripod set

(150mm bowl)

  now available with Ronford tripod legs

• Aluminium legs
• bottom spreader
• min height - 73cm
• max height - 174cm
• Payload 2 - 35kg / 4 - 55lbs
• Weight (without bag) - 12.7kg

• incl. Sachtler Video25 - 150mm head
• Sachtler 150mm tall legs
• Sachtler 150mm low legs
• Sachtler 150mm baby legs

TR06

Low Legs (100mm bowl)

• alluminium legs
• min height - 35cm
• max height -

TR07

Hi Hat (100mm bowl)

choose either one

comes with adapter for 75mm tripod head

TR08

MonoPod

• alluminium leg
• min height -
• max height -

TR09

ProJib

this Jib can carry cameras up to 30kg load

the kit includes:

• Jib Arm
• Weights 4x 5kg, 2x 2.5kg
• Adapter plate for 75mm tripod head
• travels in a carry bag

• min height - 30cm
• max height - 300cm

PJ01

ProJib Kit

this Jib can carry cameras up to 30kg load

full production kit includes:

• Jib Arm
• Weights 4x 5kg, 2x 2.5kg
• Heavy Duty tripod legs
• Sachtler Video18 or 20 fluid head
• Adapter plate for 75mm tripod head
• travels in a carry bag

• min height - 30cm
• max height - 300cm

PJ02

Zhiyun Crane2 - 3-Axis Gimbal Kit with Follow Focus

this camera stabilizer can carry camera rigs up to 3.2kg

like a FS7 / FS5 / FS100 / 5D / A7s

• quick release camera plate
• light weight unit 1.5kg
• works with cameras as light as Sony A7s but also bigger cameras up to 3.2kg
• Camera control via Handgrip buttons
• comes with 6x batteries to last your whole day

• includes FollowFocus, 6x batteries, charger, table tripod, 5x USB cables to connect cameras
• travels in protective case

CR04

Letus Helix 3-Axis Gimbal Kit

this camera stabilizer can carry camera rigs up to 7kg

like a F5 / 55, C300 or FS7 / 700

• Flat bottom design so unit can be placed direct      on ground without the need for a holding rig
• Weight of unit 2.3kg
• works with cameras as light as Sony A7s but also bigger cameras up to 7kg
• Helix is designed to stabilize camera while          hand-holding the unit
• with optional 4th axis the Helix can be mounted  on a arm / vest type stabilizer

• min height of ground - 10cm
• max height on a ladder - 300cm

• includes SmallHD 5" monitor, batteries, charger
• travels in a Pelican case

CR01

EasyRig with FlowCine Serene 5 - 17kg

This rig allows you to deliver steady, handheld shots while relieving strain on your back, neck and shoulders.

The rig has a adjustable weight range screw at the back of the vest with which you can adjust the tension on the line for camera rigs of weights from 5 to 17kg. The camera weight is taken of your shoulders and redistributed to your hips and so allowing you to shoot handheld in comfort. The Serene gives the rig enough extension and free-flow movement so that the rig can be used with a 3-Axis Gimbal system like the one above.

The EasyRig is for camera rigs from 5 to 17kg

Kit includes: Vest

                   spring loaded Serene arm

                   camera arm

                   carry bag

CR02

Glidecam 4000

The GlideCam system works by isolating your body's motion from your camera, while your camera is balanced in a relatively motionless and isolated state. The GlideCam Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm, which isolates your motions from the camera in a way that creates smooth camera footage.

Warning: A bit of training is required to get smooth camera footage - don't expect it to happen automatically

The GlideCam 4000 is for smaller cameras up to 5.5kg

Kit includes: Vest

                   spring loaded support arm

                   camera gimbal

                   mounting stand

                   travels in a Pelican case

CR03

DJI Phantom4 Pro+ drone

The perfect tool to get those special shots from high above or starting at a presenter and flying away as he/she talks about the surrounding area.

Warning: A bit of training is required to get smooth camera footage - don't expect it to happen automatically

Kit includes:  Drone with 4K camera

                   2x 64GB micro SD cards

                   Control unit with build-in monitor

                   5x batteries

                   charger

                   travels in a custom made back-pack

DR01

Dolly, portable T-Bar structure
with PVC or Alu pipes

Heavy duty structure

choose between alu pipes for travel - 10x 1 metre long  or use two 4 metre long PVC pipes

Note: tripod is not included in the hire

        - it is an extra hire item

DO01

Portable GoGo dolly
with pipes

light weight dolly with 4 metres of metal folding track

travels in soft carry bag

DO02

Portable Spider dolly
with PVC or Alu pipes

4 wheels on each end makes this dolly

a very smooth ride

choose between alu pipes for travel - 10x 1 metre long  or use two 4 metre long PVC pipes

travels in soft carry bag

DO03

Portable Camera slider

suitable for cameras up to 10kg

can take flat-mount tripod head or with included bowl mount attachment a 75mm bowl or 100mm bowl tripod head

can stand on the ground or on a table or can be mounted on a tripod or between two light stands

Note: tripod head is not included in the hire

        - it is an extra hire item

DO04

Rolling Spreader

with wheels that turn 360° you can go anywhere freely with this dolly and then put the brakes on and park it up

DO05

Tilta Handle Bars

- for 15mm or 19mm rods

- both handles can be put into any position

SR01

Tilta Shoulder Rig

- for any small size camera like F3, FS100, EX3, EX1,       Z series, XA10, HFS10, AF100 or DSLR cameras

SR02

Tilta Shoulder Rig

with Cage and Top Handle

- for any small size camera like FS100, EX3, EX1,           Z series, XA10, HFS10, AF100 or DSLR cameras

SR03

Tilta Shoulder Rig

with Cage, Top Handle, Follow Focus and swing-away MattteBox with Flags

- for any small size camera like F3, FS100, EX3, EX1,       Z series, XA10, HFS10, AF100 or DSLR cameras

SR04

Shoulder Rig

- for any small size camera like F3, FS100, EX3, EX1,       Z series, XA10, HFS10, AF100 or DSLR cameras

SR05

DSLR Shoulder Rig

- for any DSLR camera like 5D, 7D etc.

SR06

Cine-Saddle for small cameras

soft support for smaller size camera

CS01

Cine-Saddle for large cameras

soft support for bigger size camera

CS02

Genus GAP adapter plate

The Genus GAP is an adapter plate for the Sony VCT-14 tripod plate. This adapter allows small camcorders to be attached to the VCT-14 for quick locking action on a tripod..

Servo Zoom for Sony EX cameras

Lets you operate the zoom and record function on

EX1, EX3, PMW200, PMW300

SZ01

Servo Zoom / iLanc for Sony Z1P, Z7P, PD150/170 or Canon XA10 / XA25

Lets you use the iLanc connection on Sony and Canon cameras to operate the zoom and record function

SZ02

Teradek Bolt300ft

wireless video sender/receiver

This is a zero delay (<1ms) wireless video system that transmits uncompressed 1080p50, 4:2:2 video

• Uncompressed Wireless SDI and HDMI, 1080p 50
• Transmitter can be paired with up to 4x Receivers
• 300 feet Line of Sight Transmission
• Less than 1 Milliseconds Latency
• Automatic Channel Selection
• 5 GHz, Unlicensed Band
• Tx can be powered of camera battery via D-tap
• USB3 can be connected direct to computer

Kit includes 1x transmitter and 1x receiver

                  2x Lemo to D-tap power supply cables

                  2x SDI, 2x HDMI and USB cables

                  Batteries for Tx and Rx if required

Additional receivers @ $50 each

For monitor/wireless combo please check monitor page

AN00

iKan Blitz400ft

wireless video sender/receiver

This is a zero delay wireless video system that transmits uncompressed 1080p50, 4:2:2 video

• Uncompressed Wireless SDI and HDMI, 1080p 50
• 400 feet Line of Sight Transmission
• Automatic Channel Selection
• 5 GHz, Unlicensed Band
• Tx and Rx can be powered of camera battery via D-tap or via its own NP-F style battery
• X converts from SDI to HDMI and vice versa

Kit includes 1x transmitter and 1x receiver

                  2x Lemo to D-tap power supply cables

                  2x SDI, 2x HDMI and USB cables

                  Batteries for Tx and Rx if required

AN01

Cinegear Ghost-Eye 400M V2

wireless video sender/receiver

This is a zero delay (<1ms) wireless video system that transmits uncompressed 1080p50, 4:2:2 video

• 400 metres Line of Sight Transmission ensured   and up to 1,000 metres max
• Uncompressed 1080p50, 10-Bit, 4:2:2
• Supports up to 4 Receivers
• Automatic Channel Selection, Auto Relink
• 5 GHz, Unlicensed Band
• Tx and Rx can be powered of camera battery      via D-tap
• X converts from SDI to HDMI and vice versa
• Receiver can be used with stick or panel antenna

Kit includes: 1x transmitter and 1x receiver

                   2x Cold-shoe mounts

                   2x Lemo to D-tap power supply cables

                   2x SDI, 2x HDMI and USB cables

                   Batteries for Tx and Rx if required

                   Extra-Large Panel Antenna

AN03

Nyrius wireless video sender/receiver

Send your high definition video signal from the camera via 5Ghz band to a monitor and watch it in stunning HD quality that you can even record

• Uncompressed Wireless HDMI, 1080p 50
• Single Pair Transmitter/Receiver
• 150' Line of Sight Transmission
• Less than 2 Milliseconds Latency
• Automatic Channel Selection
• 5 GHz, Unlicensed Band
• can be powered of camera USB so does not add any additional weight as transmitter unit only 50g

Kit includes: 1x transmitter and 1x receiver

                   3x USB battery banks for transmitter

                   HDMI and USB cables

AN02

V-lock batteries

with D-Tap and LCD display for hours and % display

 88Whr  = $8

120Whr = $10

160Whr = $10

190Whr = $12

230Whr = $14

BA01

BP-U60 batteries

- for FS7, F3, PMW300, EX3 and EX1 cameras

BA02

NP-F970 batteries

- for Sony FS100, Z1, Z5, Z7, V1, PD150/170 cameras

- for on-camera sungun lights

BA03

Battery charger

- for Sony V-lock or U60 or NP-F series

BA04

8GB SxS cards

- 28 minutes of full HD recording @ 35Mb/s

MC01

16GB SxS cards

- 1 hour of full HD recording @ 35Mb/s

MC02

32GB SxS cards

- 2 hours of full HD recording @ 35Mb/s

MC03

64GB SxS cards

- 4 hours of full HD recording @ 35Mb/s

MC04

64GB XQD G-series cards

for Sony FS7 camera

MC04

128GB XQD G-series cards

for Sony FS7 camera

MC04

256GB XQD G-series cards

for Sony FS7 camera

MC04

16GB Compact Flash (CF) cards

MC05

32GB Compact Flash (CF) cards

MC06

64GB Compact Flash (CF) cards

MC07

128GB Compact Flash (CF) cards

MC08

128GB CFast cards

MC09

32GB SDHC - Class10 cards

- 3 hours of full HD recording @ 24Mb/s

MC10

64GB SDXC UHS-II U3 Class10 card

- for 4K recording

- Read up to: 150MB/s

- Write up to: 150 MB/s

MC11

128GB SDXC UHS-II U3 Class10 card

- for 4K recording

- Read up to: 300MB/s

- Write up to: 299 MB/s

MC12

Tape stock & XDCAM disks

• DV - 60min
• HDV - 63min
• DVCam - 64min, 180min
• Beta SP - 30min
• DigiBeta - 32min, 40min

• XDCAM disks - 23GB

Clapper board

AN02

5 in 1 Light disk (Flecky)

• white
• black
• gold
• silver
• diffuser

different sizes available from 80cm to 2m

GA09

Green Screen material

Stretch Lycra - 4 metres wide x 3 metres high

can be stretched between two C-stands or poles and so does not have any crease to cause a shadow

GS01

Pop up Green Screen with own stand

1.5 metres wide x 2.2 metres high

comes with free-standing stand

GS02

Super-Clamp

GA04

Sand Bags

• filled with 11kg of steel sand

• travel sandbag to be filled on location                  with sand or dirt

GA10

BNC cables

- from 30cm ($5) to 50 metres ($25)

AN03

Ambient ACL-202 Clockit Box -

              Timecode Generator

The Clockit, called "Lockit" by many, is a small, highly accurate portable timecode and colour videosync and wordclock generator. Audio and video machines can be genlocked to the Clockit Box, thus giving a very low drift between equipment working together. Typically, the drift will be less than 1 frame per day, without connecting cables or radio links. The Clockit can be jamsynced with external timecode, or set with Aaton ASCII code. The Clockit is especially useful in multi-camera shoots, where a Clockit on each camera and one on the audio recorder will reduce drift between machines to under one frame a day.

AN04

Ikelite Underwater Housing for Canon HFS10 camera

(60m rated)

• incl. Dome port with Wide Angle lens
• Green and Blue Filters for colour correction - removable under water
• Housing Features - rear and top view LCD Monitor, Power On/Off, Record Start/Stop, Zoom Control, Snapshot Control, Joystick Control, Mode Dial Control, Functions Button, Custom Button, Custom Dial

Ikelite Underwater Lights

• Pro Video Lite3 more info
• + Pro-V8 LED Video Lite more info